 |
hh85 dynamic handheld transmitter for the cts wireless microphone system
- cardioid dynamic element
- power/mute button
- lcd display (frequency, battery life, mute, gain, rf power)
- ir sync transmitter to receiver
- selectable power 5, 10, 20 mw rf
- selectable gain -3, 0, 3, 6, 9
- operates on 2 aa batteries (up to 12 hours alkaline)
- dimensions: 9.68" x 2.08" (246 x 53 mm) (lxdia)
- weight: 8.8 oz (250 g)
|
 |
body pack transmitter for the cts wireless microphone system
- power/mute button
- lcd display (frequency, battery life, mute, gain, rf power)
- ir sync transmitter to receiver
- selectable power 5, 10, 20 mw
- selectable gain -3, 0, 3, 6, 9
- operates on 2 aa batteries (up to 12 hours alkaline)
- dimensions: 3.85" x 2.51" x 0.90" (98 x 64 x 23 mm) (hxwxd)
- weight: 3.17 oz (90 g)
|
 |
single and dual monitor rack mount kit, includes 1 long rack ear, 2 short rack ear, 2 coupler plates, and assorted screws. the mrewd allows for racking a single or two wireless in-ear monitors systems or wireless mic systems in a 1u space. works with pse, dhx, cts, as-900, as-1100, & as-1400 systems.
|
 |
this affordable lav mic comes standard with the ecm, pse, trc, dht, dhx, cts, & traveler lavalier systems. the lv-u3bk unidirectional lapel microphone works with transmitters made by 2022世界杯附加赛决赛
®, shure®, sennheiser®, akg®, and 乐鱼官网在线登录
technica®, as well as most other brands of wireless microphone systems.
- uni-directional
- lapel / lavalier
|
 |
this uni-directional headset comes standard with the ecm, pse, trc, dht, dhx, cts, & traveler headset systems. it's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. the hs-u3bk uni headset microphone can be wired to work with transmitters made by 2022世界杯附加赛决赛
®, shure®, sennheiser®, akg®, and 乐鱼官网在线登录
technica®, as well as most other brands of wireless microphone systems.
- uni directional headset microphone
- hooks over both ears
|
 |
standard mic clip for handheld microphones
|
 |
the wireless microphone antenna distribution system expands wireless microphone systems only, by splitting one pair of antennas to allow up to four single channel receivers to use the same antennas. 3db gain compensates for any insertion loss and increases receive signal range (up to 275ft). low-loss 50 ohm bnc connectors for mounting antenna. includes rack ears for mounting rack space (1ru) distributes the antenna for up to 4 wireless microphone systems (pse, cts, and dhx series). bnc connectors, single rack space, combines power for up to four wireless receivers as well.
note: only works with wireless microphone receivers. this wireless microphone antenna distribution system does not work with in-ear systems.
- combines antennas for up to 4 mic receivers
- four dc outputs eliminate individual power supplies
- 500mhz-900mhz range
- built in antenna booster
- increase receiver signal rans up to 275 ft more
- 3db gain compensaton
- 19" rack space
|
 |
wireless directional antenna used to decrease interference to other equipment. frequency range 500-900mhz
the uhf wide-band (500-900 mhz) directional lpda (log periodic dipole array) antenna reduces outside interference while providing increased send/receive signal range. each antenna paddle is matched to 50 ohms impedance with a low-loss bnc connector; 7dbi gain. professional wireless antenna for permanent or temporary installation; mounts to 5/8"-27 threads.
it is suggested that the angle between the paddle antenna and the thransmitter should be from 90º to 120º. normally the effective range can reach about 300'.
- 500-900 mhz
- lpda antenna
- 7dbi gain
- can mount to mic stand
- improves range
|
 |
this includes:
one wire bnc connector cable (part# cn-bncpm) and
one 19.69" (50 cm) rg58 cable (part# extbnc) for front mounting antenna.
|
 |
universal power adaptor. the as-ua12-14.5 supplies 12v dc at 1000ma to our wireless microphone & monitor systems such as the dht, dhx, dhtrquad, dhxr4, pse, ecm, ecd, edx, as-900, 2022世界杯附加赛决赛
as-1100 & as-1800 using the common 5.5mm barrel plug with center positive. the universal ac power adaptor comes with 4 different ac plug adaptors, and will accept any input voltage from 100 to 240v ac, 50-60hz, which means it will work in nearly every country on the planet.
- 12v dc 1000ma
- 5.5mm plug
- converts systems to accept 230 vac.
|
reviews
there are no reviews yet.